Aug 11, 2016 Iveco EuroCargo (up to 2003)-manual Provides guidance on repair and maintenance of trucks Iveco EuroCargo (capacity from 6 up to 10 tons) issued prior to the 2003 season. Year of publication: 2006. Iveco eurocargo 75e16 thompson dropside tipper 35,000 miles. 2010 7500 kg tipper. 2010 iveco euro-cargo 75e16 eev thompson double dropside tipper binotto front ram 160-bhp turbo diesel / manual gearbox / p,a,s 3 seat cab / beacons - towbar - 1 owner from new / 35,000 miles only!!! Iveco Iveco Stralis Iveco Stralis 2009 2016 Service Repair Manual Iveco - Euro 6 - Parts Catalogue - 2014 - 2014 Iveco - Eurocargo - Sales Brochure - 2016 - 2016. Iveco Eurocargo 120E18 Had corrosion in 2 of the rear lights (Hamburger) so replaced them with LED units. Now when the indicators are used the fault light comes on and a klaxon sounds but the indicators are working fine. Iveco ford cargo 75e15 inside the cab.
- Iveco Cargo 75e Service Manual Transmission
- Iveco Cargo 75e Service Manual Diagram
- Iveco Cargo 75e Service Manual 2017
- Iveco Cargo 75e Service Manual Download
- Iveco Cargo 75e Service Manual Free
It's a 58 plate, with 200,000 Kms.
The gearbox has suffered a fault in warm weather since 2011, despite some investigation / parts replacement by the dealer.
A fuller description below:
Iveco Cargo 75e Service Manual Transmission
The fault occurs in warm weather, so happens often on the continent but has also happened in London and even in Edinburgh. The warmer the ambient temperature, the more likely that the fault will occur and the more severe the problem.Scenario 1
Driving on the motorway for 4.5 hours in warm weather. Easy driving so the gearbox doesn't have to do much. Drive into the services and stop so that the truck can be manoeuvred into a parking space. Once the truck has stopped it can't be moved again - the engine can't be revved up. Pressing the gearbox buttons only changes the display to N and usually also the gearbox fault symbol. It's not a true neutral because the engine speed can't be increased above idle.There is a noise which sounds like a pump straining. It can take 10 to 40 minutes before a gear can be selected. The first thing to return is 1 SLOW but with the fault symbol still showing when the truck can be moved forward slowly. It needs more time before R can be selected. When it does select 1 or R, there is a thump and a lurch. If the truck is then driven for only 5 minutes and stopped, the fault is there again and it will take another long time before it can be moved. Leave the truck for the drivers 45 minute break and it can be used but the selection of 1 or R is very slow to happen - maybe 5 seconds.
Iveco Cargo 75e Service Manual Diagram
This bit I don't understand - during the fault - if the engine is switched off and then restarted - the display will show N with no fault symbol - and it is a true neutral because the engine can be revved up but pressing either D or R will put it into the fault condition so that the display remains at N but with the fault symbol and the engine can't be revved. What changes it into neutral? Is it a different system? a spring? air pressure?Scenario 2
Driving on the motorway for 3 to 4 hours in warm weather. Easy driving so the gearbox doesn't have to do much, but will change between 4, 5, and 6 normally. The traffic stops so the truck is braked to a stop - it changes down to 3 and stops. The traffic moves on but the truck can't be moved - it won't rev - it might show 3 for a while but will usually show N with the gearbox fault symbol. Then it's the same situation as above - needs time before 1 SLOW can be selected.
Again, this bit I don't understand. If I anticipate that the traffic is going to stop, and I use the column lever to change down to 2 or 1 just before the truck stops moving then it can be kept driving.
Scenario 3
When the truck appears to be working OK, in cool weather, even in Scotland it can be very slow to select 1 or R - a few seconds. The time is so significant that if someone is waving you back, then they will start to wonder why you aren't moving.
Iveco Cargo 75e Service Manual 2017
Iveco Cargo 75e Service Manual Download
I don't know how the gearbox works - it seems to me that the system for selecting 1 / 2 or R is different to the gearchanges between 3 / 4/ 5 / 6 and different again to the system for putting the gearbox in N when the engine is stopped.When the gearbox is at fault it feels to me as though hydraulic fluid is either aerated or has thinned down in the heat and so won't move the internals.
Driving on the motorway for 3 to 4 hours in warm weather. Easy driving so the gearbox doesn't have to do much, but will change between 4, 5, and 6 normally. The traffic stops so the truck is braked to a stop - it changes down to 3 and stops. The traffic moves on but the truck can't be moved - it won't rev - it might show 3 for a while but will usually show N with the gearbox fault symbol. Then it's the same situation as above - needs time before 1 SLOW can be selected.
Again, this bit I don't understand. If I anticipate that the traffic is going to stop, and I use the column lever to change down to 2 or 1 just before the truck stops moving then it can be kept driving.
Scenario 3
When the truck appears to be working OK, in cool weather, even in Scotland it can be very slow to select 1 or R - a few seconds. The time is so significant that if someone is waving you back, then they will start to wonder why you aren't moving.
Iveco Cargo 75e Service Manual 2017
Iveco Cargo 75e Service Manual Download
I don't know how the gearbox works - it seems to me that the system for selecting 1 / 2 or R is different to the gearchanges between 3 / 4/ 5 / 6 and different again to the system for putting the gearbox in N when the engine is stopped.When the gearbox is at fault it feels to me as though hydraulic fluid is either aerated or has thinned down in the heat and so won't move the internals.
Has anyone came across this fault?
Any tips to get moving again? Another guy who drives the truck suggests revving it up in neutral, and then pressing D. I'm not convinced that it helps, the drive by wire pulls the revs down to idle anyway before attemting to select drive.
TIA
Iveco Cargo 75e Service Manual Free
Ash